Thermistor - Xerox phaser 3140 Service Manual

Thermistor

PL9.0.11
Phaser 3140/3155/3160 Printer Service Manual
Downloaded From ManualsPrinter.com Manuals
Warning
Turn the printer power Off and allow the Fuser to cool 30 minutes before
performing this procedure.
1. Remove the Fuser (page 8-11).
2. Remove 1 screw (10 mm, silver, tap) securing the Thermistor.
3. Remove the wiring harness from the harness guide and remove the
Thermistor.
Service Parts Disassembly
s3160-056
8-13