Version 0.2 October 2009 Driver Upgrade Instructions Table of Content Installing updated drivers in Microsoft Windows ______________________________________________ 2 Uninstall Procedure _____________________________________________________________________ 2 Install Procedure _______________________________________________________________________ 3 Installing updated drivers in Macintosh ______________________________________________________ 4 Uninstall Procedure _____________________________________________________________________ 4 Install Procedure _______________________________________________________________________ 4 Setting Up the Printer ___________________________________________________________________ 5 For a Network-connected Macintosh _____________________________________________________ 5 For a USB-connected Macintosh_________________________________________________________ 5...
The new printer drivers and utilities are designed to work with the latest firmware release identified on the product Drivers and Downloads page on Xerox.com. The printer should be upgraded to the latest firmware before installing the new printer drivers and utilities.
October 2009 Install Procedure 1. Download the latest drivers and utilities from http://www.support.xerox.com/. 2. The downloaded file is in the .zip format and will need to be extracted to a folder on the client. 3. Once the .zip file has been extracted, browse to the folder and double-click on Setup.exe to launch the Install Wizard.
10. When the uninstall is done, click Quit. Install Procedure 1. Download the latest drivers and utilities from http://www.support.xerox.com/. 2. The downloaded file is in the .dmg format. Double click on it to open the virtual disk image. 3. Once the disk image file is opened, Double-click the MAC_Installer folder.
15. Enter the queue name in the Queue Name field. If you cannot determine the queue name for your machine server, try using the default queue first. 16. For Mac OS X 10.3, if Auto Select does not work properly, select Xerox in Printer Model and your machine name in Model Name.
Page 6
October 2009 13. Select your printer name. 14. For MAC OS 10.3, if Auto Select does not work properly, select Xerox in Printer Model and your printer name in Model Name. For MAC OS 10.4, if Auto Select does not work properly, select Xerox in Print Using and your printer name in Model.
6. Click Finish. Install Procedure 1. Download the latest drivers and utilities from http://www.support.xerox.com/. 2. The downloaded file is in the .tar format and will need to be extracted to a folder on the client. 3. Once the .tar file has been extracted, browse to the folder and double-click on setup.sh to launch the Install Wizard.
Page 8
Version 0.2 October 2009 7. The Printer’s IP address and model name appears on list field. 8. Select your machine and click Next. You have now completed all steps in performing a Linux Driver upgrade. Page 8 of 8...