Service Parts Disassembly
Thermostat
PL9.0.12
8-14
Downloaded From ManualsPrinter.com Manuals
Warning
Turn the printer power Off and allow the Fuser to cool 30 minutes before
performing this procedure.
1. Remove the Fuser (page 8-11).
2. Remove 3 screws (8 mm, black) that secure the Thermostat.
CN49
3. Lift the Thermostat away from the Fuser Cover.
4. Disconnect the wiring harness connectors CN49 & CN50 from the Thermostat.
5. Remove the Thermostat.
CN50
Phaser 3140/3155/3160 Printer Service Manual
s3160-064