Heat Roller - Xerox phaser 3140 Service Manual

Heat Roller

PL9.0.36
Phaser 3140/3155/3160 Printer Service Manual
Downloaded From ManualsPrinter.com Manuals
5. Remove 2 screws (8 mm, black, tap), one on each end of the Fuser, and gently
slide the Fuser Lamp out of the Fuser.
Caution
Hold the halogen lamp by the ends so there is no transfer of oil from your
hands onto the lamp, which can damage the lamp.
Warning
Turn the printer power Off and allow the Fuser to cool 30 minutes before
performing this procedure.
1. Remove the Fuser (page 8-11).
2. Remove the Fuser Lamp (page 8-15).
Service Parts Disassembly
s3160-136
8-17