Stains On The Back Of The Page - Xerox phaser 3140 Service Manual

Stains on the Back of the Page

Phaser 3140/3155/3160 Printer Service Manual
Downloaded From ManualsPrinter.com Manuals
The background on the back of the page is stained at 47.0 mm intervals.
Initial Actions
• Print the Print Cleaning Page (page 4-2) several times.
• Check for damage or debris in the Fuser.
Troubleshooting Reference Table
Applicable Parts
Transfer Roller, PL1.0.8
Fuser, PL9.0.0
Warning
Allow the Fuser to cool before starting the procedure.
Troubleshooting Procedure Table
Step Actions and Questions
1
Print the Print Cleaning Page
(page 4-2) several times.
Does the error persist?
2 Replace the Transfer Roller
(page 8-8). If the Transfer Roller is
contaminated severely, replace it.
Does the error persist?
3
Disassemble the Fuser and clean the
Heat Roller, Pressure Roller, and the
area between the Heat Roller and
Thermistor.
Does the error persist?
Print-Quality Troubleshooting
Example Print
Residual Image/Ghosting
Yes No
Go to step 2. Complete.
Go to Step 3. Complete.
Replace the Complete.
Fuser
(page 8-11).
5-27