Remote Control - Sony STR-ZA5000ES User Manual

1.
Speaker system indicator
2. SW
Lights up when subwoofer(s) is (are) connected and the audio signal is output from the PRE
OUT SUBWOOFER jack(s).
3. Playback channel indicator
Indicates the speaker that is designated to output sound. Shows how the receiver down-
mixes or up-mixes the source sound, based on the speaker settings.
L
Front Left
R
Front Right
C
Center
SL
Surround Left
SR
Surround Right
SBL
Surround Back Left
SBR
Surround Back Right
H1L
Height1 Left
H1R
Height1 Right
H2L
Height2 Left
H2R
Height2 Right
4.
/ / /
Indicates currently available operation on the display panel using

remote control.

5. IN-CEILING
Lights up when the In-Ceiling Speaker Mode is activated.
6. SLEEP
Lights up when the sleep timer is activated.
7. Tuning indicator
Lights up when the receiver tunes to a radio station.
ST
The receiver tunes to a stereo broadcast.
MONO
FM receiving mode is set to the mono mode.
PRESET
The tuning mode is set to the preset mode.
8. ZONE2, ZONE3
The applicable indicator lights up while [Zone2 Power] or [Zone3 Power] is set to [On].
9.
VOLUME
Displays the current volume.
10. HDMI OUT A+B
11. D.C.A.C.
Lights up when the measurement results of the Auto Calibration function are applied.
12. A.P.M.
Lights up when the A.P.M. (Automatic Phase Matching) function is activated. You can only
set the A.P.M. function in the D.C.A.C. (Digital Cinema Auto Calibration) function.
13. D.L.L.
Lights up when the Digital Legato Linear (D.L.L.) function is activated.
14. S.OPT.
Lights up when the Sound Optimizer function is activated.
15. EQ
Lights up when the equalizer is activated.
16. D.RANGE
Lights up when dynamic range compression is activated.
17. DTS:X
Lights up when DTS:X decoding is activated.
18. Neural:X
Lights up when DTS Neural:X decoding is activated.
19. Surr
Lights up when Dolby Surround decoding is activated.
20. Atmos
Lights up when Dolby Atmos decoding is activated.
21. Input indicator
Lights up to indicate the current input.
AUTO
[Input Mode] is set to [Auto].
HDMI
The receiver recognizes devices connected via an HDMI IN jack.
COAX
Digital signals are input through the COAXIAL jack.
OPT
Digital signals are input through the OPTICAL jack.
ARC
/ / / on the