Sony STR-ZA5000ES User Manual page 48

Input sources which can be output to Zone 2 (analog connection)
The following input sources can be output to Zone 2.
Input name
Signals from the current input in main zone
SOURCE
Source signal from the HDMI IN 1 (BD/DVD) jack (*1)
BD/DVD
Source signal from the DIGITAL COAXIAL IN (BD/DVD) jack (*1)
Source signal from the HDMI IN 2 (SAT/CATV) jack (*1)
SAT/CATV
Source signal from the HDMI IN 6 (GAME) jack on the front panel (*1)
GAME
Source signal from the HDMI IN 3 (STB) jack
STB
Source signal from the HDMI IN 4 (VIDEO) jack (*1)
Source signal from the VIDEO IN VIDEO jack
VIDEO
Source signal from the AUDIO IN VIDEO jacks
Source signal from the VIDEO IN AUX jack
Source signal from the DIGITAL OPTICAL IN 1 (AUX) jack (*1)
AUX
Source signal from the AUDIO IN AUX jacks
TV sound from the DIGITAL OPTICAL IN 2 (TV) jack (*1)
TV
Source signal from the AUDIO IN TV jacks
Source signal from the HDMI IN 5 (SA-CD/CD) jack (*1)
SA-CD/CD
Source signal from the AUDIO IN SA-CD/CD jacks
FM broadcast received through the built-in tuner
FM TUNER
AM broadcast received through the built-in tuner
AM TUNER
*1 The following restrictions are set on the digital audio signals input from the HDMI, coaxial and optical input jacks
on the receiver:
Only 2ch PCM signals are output to Zone 2.
Digital audio stream signals such as DSD and Dolby Digital are not output to Zone 2.
Multi-channel stream signals are automatically converted to 2 channels signals, and then
output to Zone 2 if the same source signals as the main zone are selected in Zone 2.
If the digital audio signals input from the HDMI, coaxial and optical input jacks on the receiver are not output to
Zone 2, set the audio output to 2ch PCM on the connected device. For details, refer to the operating instructions
of the connected device.
Note
When [FM TUNER] or [AM TUNER] is selected at the same time in the main zone and Zone 2 or
Zone 3, the item most recently selected will be set.
If you change the sound field or speaker settings in the main zone while the input for Zone 2 is set to
[SOURCE] or the same input is selected in the main zone and Zone 2, the sound may also be
momentarily interrupted in Zone 2.
Input sources which can be output to Zone 2 (HDMI connection)
The following input sources can be output to Zone 2 when Zone 2 speakers are connected to
another receiver or amplifier connected to the HDMI OUT B (ZONE 2) jack.
Input name
Signals from the current input in main zone
SOURCE
Source signal from the HDMI IN 1 (BD/DVD) jack
Source signal from the COMPONENT VIDEO IN 1 (BD/DVD) jacks (*2)
BD/DVD
Source signal from the DIGITAL COAXIAL IN (BD/DVD) jack (*3)
Source signal from the HDMI IN 2 (SAT/CATV) jack
SAT/CATV
Source signal from the HDMI IN 6 (GAME) jack on the front panel
GAME
Source signal from the HDMI IN 3 (STB) jack
STB
Source signal from the HDMI IN 4 (VIDEO) jack
Source signal from the COMPONENT VIDEO IN 2 (VIDEO) jacks (*2)
VIDEO
Source signal from the VIDEO IN VIDEO jack (*2)
Source signal from the AUDIO IN VIDEO jacks
Source signal from the VIDEO IN AUX jack (*2)
Input source
Input source