Compressing The Dynamic Range (Dynamic Range Compressor); Up-Converting Video Signals To 4K (4K Scaling) - Sony STR-ZA5000ES User Manual

2 Select [Dual Mono].
Select the setting you want.
3
Main: Sound in the main language will be output.
Sub: Sound in the sub language will be output.
Main/Sub: Sound in the main language will be output through the front left speaker
and sound in the sub language will be output through the front right speaker
simultaneously.
[129] Adjusting Settings Audio Setup
Compressing the dynamic range (Dynamic Range
Compressor)
You can compress the dynamic range of the soundtrack. This may be useful when you want to
watch movies at a low volume late at night, etc.
This function only works for Dolby Digital and Dolby TrueHD sources.
Select [Setup] - [Audio Setup] from the home menu.
1
Select [Dynamic Range Compressor].
2
Select the setting you want.
3
Auto: The dynamic range is compressed automatically when there is a flag in the
sound source that recommends using the Dynamic Range Compressor function.
On: The dynamic range is compressed as intended by the recording engineer.
Off
Note
This function does not work when [Pure Direct] is set to [On].
[130] Adjusting Settings Audio Setup
Switching the mode of the DTS decoder (Neural:X)
You can switch the DTS decoder to "Direct Mode" or "Non-Direct Mode."
When in "Direct Mode," the audio is extracted and reproduced as closely as possible to what the
content creator intended. When in "Non-Direct Mode," the audio is extracted and adapted to fit
as closely as possible to the speaker layout of the playback system (regardless of the source
configuration). This function only works when the DTS stream is input.
Select [Setup] - [Audio Setup] from the home menu.
1
Select [Neural:X].
2
Select the setting you want.
3
On: The DTS decoder is switched to "Non-Direct Mode."
Off: The DTS decoder is switched to "Direct Mode."
Note
You cannot set this function to [Off] when [Neural:X] is selected.
You cannot set this function to [On] in the following cases:
[2ch Stereo], [Direct] or [Dolby Surround] is selected.
[Pure Direct] is set to [On].
[131] Adjusting Settings HDMI Setup

Up-converting video signals to 4K (4K Scaling)

You can up-convert video signals to 4K and output them through the HDMI OUT A jack of the
receiver.
Select [Setup] - [HDMI Setup] from the home menu.
1