Sony STR-ZA5000ES User Manual page 72

meter: The distance is displayed in meters.
feet: The distance is displayed in feet.
[116] Adjusting Settings Speaker Setup
Playing back WAV files stored on a USB flash drive
You can play back WAV files on a USB flash drive connected to the receiver.
This operation is only available using the display panel on the front of the receiver.
Save wav files which meet the following in "/test_wav" folder on a USB flash drive.
1
Number of channels: 2
Sample rates (bit depth): 44.1/48 kHz (24 bit) or 44.1/48/88.2/96 kHz (16 bit)
Connect the USB flash drive to the SETTING
2
receiver.
3 Press AMP MENU.
Select [4. AUDIO SETUP] - [4.11. PLAY TEST WAV].
4
Playback starts.
Operating the USB flash drive
You can use the following knob and buttons on the front of the receiver to operate the USB flash
drive:
MASTER VOLUME: Adjusts the volume.
ENTER: Starts or pauses playback.
/ : Press and hold to perform fast forward or fast reverse the current track.
/ : Moves to the start of the previous/current or next track.
Note
Some audio files may not be played back properly even if they are in the specified format.
[117] Adjusting Settings Network Setup
Setting up a network (Internet Setup)
You can set up a wired LAN connection by the following procedure.
1 Select [Setup] - [Network Setup] from the home menu.
2 Select [Internet Setup].
3 Select [Auto].
4 Select [OK].
The receiver starts connecting to the network. For details, refer to the messages that
appear on the TV screen.
If using a fixed IP address
Select [Manual] in step 3. The IP address input display appears on the TV screen.
Enter the value for [IP Address] using the on-screen keyboard. Press
select the characters one by one, then select [Enter] to confirm the values.
Enter the values for [Subnet Mask], [Default Gateway], [Primary DNS] and [Secondary DNS],
then select [Next].
Hint
See [Information] when checking the network settings.
[118] Adjusting Settings Network Setup
(USB) port on the front of the
/ / / and to