Sony STR-ZA5000ES User Manual page 117

OFF, -40.0dB to +23.0dB
Zone2 Preset Volume [6.4. ZONE2 PRESET VOLUME]
OFF, -oodB, -92.0dB to +23.0dB
Zone2 Max Volume [6.5. ZONE2 MAX VOLUME]
OFF, -40.0dB to +23.0dB
Zone2 Line Out [6.6. ZONE2 LINE OUT]
VARIABLE, FIXED
Zone3 Preset Volume [6.7. ZONE3 PRESET VOLUME]
OFF, -oodB, -92.0dB to +23.0dB
Zone3 Max Volume [6.8. ZONE3 MAX VOLUME]
OFF, -40.0dB to +23.0dB
Zone3 Line Out [6.9. ZONE3 LINE OUT]
VARIABLE, FIXED
7. System Setup [7. SYSTEM SETUP]
Language [7.1. LANGUAGE]
ENGLISH, SPANISH, FRENCH
Auto Display [7.2. AUTO DISPLAY]
ON, OFF
Auto standby mode [7.3. AUTO STANDBY]
ON, OFF
Volume Display [7.4. VOLUME DISPLAY]
RELATIVE, ABSOLUTE
Dimmer [7.5. DIMMER]
BRIGHT, DARK, OFF
Sleep timer [7.6. SLEEP]
OFF - 0:30:00 - 1:00:00 - 1:30:00 - 2:00:00
Software Version [7.7. SOFTWARE VERSION]
x.xxx (*8)
Network Update [7.8. NETWORK UPDATE]
USB Update [7.9. USB UPDATE]
Tuner Setup [7.10. TUNER SETUP]
8. Install Setup [8. INSTALL SETUP]
External Control [8.1. EXTERNAL CONTROL]
ON, OFF
Trigger 1 [8.2. TRIGGER 1]
Trigger 2 [8.3. TRIGGER 2]
Trigger 3 [8.4. TRIGGER 3]
Test Picture for HDMI Out A [8.5. TEST OUT A]
4K/60Hz/4:4:4, 4K/24Hz/4:4:4, 1080p/60Hz, 480p/60Hz, OFF
Test Picture for HDMI Out B [8.6. TEST OUT B]
4K/60Hz/4:4:4, 4K/24Hz/4:4:4, 1080p/60Hz, 480p/60Hz, OFF
Save/Load [8.7. SAVE/LOAD]
Settings Lock [8.8. SETTINGS LOCK]
ON, OFF
9. Easy Setup [9. EASY SETUP]
Auto Calibration [9.1. AUTO CALIBRATION]
Internet Setup [9.2. INTERNET SETUP]
You can select this setting only when you have performed Auto Calibration and saved the settings.
*1
You can only select this parameter if [SP PATTERN] is not set to a pattern with surround back speakers.
*2
*3 You can only select this parameter if [SP PATTERN] is not set to a pattern with height or overhead speakers (top
front, top middle, top rear or Dolby Atmos enabled speakers).
*4 XXX represents a speaker channel (FRONT, CENTER, SURROUND, HEIGHT1, HEIGHT2).
XXX represents a speaker channel (FRONT L, FRONT R, CENTER, SURROUND L, SURROUND R, SUR BACK
*5
L, SUR BACK R, SUR BACK, HEIGHT1 L, HEIGHT1 R, HEIGHT2 L, HEIGHT2 R, SUBWOOFER).
*6 Some parameters or settings may not be available depending on the speaker pattern setting.
*7 You can only select this parameter if the speaker is set to [SMALL].
*8 x.xxx represents the version number.
Attaching the front cover onto the front panel
Attach the front cover to prevent misoperations.
Removing the front cover from the front panel
Remove the front cover from the bottom side.
Note
Do not forcibly remove the front cover from the top side since it is firmly attached. Doing so may
cause injury or damage the front cover or the receiver.
Setting the FM station receiving mode (FM Mode)
You can set the FM station receiving mode to the stereo mode or monaural mode.
1 Select [Listen] - [FM TUNER] from the home menu.
If the Simple mode screen appears, switch to the Full mode screen by pressing OPTIONS
and selecting [Full] in [FM/AM Display] from the options menu.