Sony STR-ZA5000ES User Manual page 55

7 Turn on the Control for HDMI function of the connected device.
For details on setting the connected device, refer to the operating instructions of the
respective devices.
Repeat steps 6 and 7 for other devices for which you want to use the Control for
8
HDMI function.
Note
Perform the steps above again if you unplug the HDMI cable or change the connection.
This function is enabled only when [HDMI Out B Mode] is set to [Main].
[72] Using Other Features Interlocking with BRAVIA TV and other devices ("BRAVIA" Sync)
Turning off the receiver and connected devices
simultaneously with the TV (System Power Off
function) (Standby Linked to TV)
You can turn off the receiver and the connected device automatically when you turn off the TV.
Select [Setup] - [HDMI Setup] from the home menu.
1
Select [Standby Linked to TV].
2
Select the setting you want.
3
Auto: If either of the following inputs is selected on the receiver, the receiver will turn
off when the TV is turned off:
[TV]
An input assigned with either [HDMI], [COMPONENT] or [COMPOSITE] for video
using [Input Assign]
An input assigned with [HDMI] for audio using [Input Assign]
On: The receiver will turn off when the TV is turned off regardless of the input of the
receiver.
Off: The power of the receiver does not turn off when the TV is turned off, regardless
of the input of the receiver.
Note
This setting is valid when [Control for HDMI] is set to [On].
The connected device may not turn off depending on the status of the device.
System Power Off function may work with devices other than those manufactured by Sony, but
operation is not guaranteed.
[73] Using Other Features Interlocking with BRAVIA TV and other devices ("BRAVIA" Sync)
Enjoying TV sound from the speakers connected to
the receiver (System Audio Control function)
If you turn on the receiver while you are watching the TV, the TV sound will be output from the
speakers connected to the receiver. The volume of the receiver can be adjusted using the TV
remote control.
If the TV sound was output from the speakers connected to the receiver last time you watched
the TV, the receiver will be turned on automatically when you turn on the TV again.
Operations can also be made using the TV menu. For details, refer to the operating instructions
of the TV.
Note
Depending on the TV, the number of the receiver volume level is displayed on the TV screen. The
volume number displayed on the TV may differ from the number on the front panel display of the
receiver.
System Audio Control function may work with other devices than those manufactured by Sony, but
operation is not guaranteed.
Depending on the settings of the TV, the System Audio Control function may not be available. For
details, refer to the operating instructions of the TV.
When [Control for HDMI] is set to [On], the [Audio Out] settings in the [HDMI Setup] menu will be set
automatically according to the setting of the System Audio Control function.