Changing The Name For Each Input (Name) - Sony STR-ZA5000ES User Manual

Name
You can change the name displayed on the Watch/Listen menu.
Watch/Listen
You can set whether an input is displayed on the Watch menu or the Listen menu.
Watch: Displays an input to the Watch menu.
Listen: Displays an input to the Listen menu.
Watch/Listen: Displays an input to both the Watch and Listen menus.
Show/Hide
You can set whether or not an input is displayed.
Show: Shows the input.
Hide: Hides the input.
HDMI
You can assign HDMI input jacks for each input.
OPTICAL / COAXIAL
You can set the digital audio input jack(s) assigned to each input.
OPT 1
OPT 2
COAX
None
COMPONENT
You can set the video input jack(s) assigned to each input.
IN 1
IN 2
None
VIDEO IN
You can set the composite video input jack(s) assigned to VIDEO IN (VIDEO) or VIDEO IN
(AUX) input signal.
AUDIO IN
Indicates an analog signal is being input.
Input Mode
You can set the input mode for each input.
Preset Sound Field
You can assign a default "Sound Field" to each input source that will be selected automatically
when you select the input source.
In-Ceiling Speaker Mode
You can select whether or not to use the In-Ceiling Speaker Mode with the current input.
A/V Sync
You can delay the output of audio to minimize the time gap between audio output and visual
display.
Subwoofer Low Pass Filter
You can turn on or off the low-pass filter for the subwoofer output. The low-pass filter works
when PCM signals are input via an HDMI connection. You can set the function for each input to
which an HDMI input jack is assigned independently. Turn the function on if you connect a
subwoofer without the crossover frequency function.
Subwoofer Level
You can set the level of the subwoofer to 0 dB or +10 dB when PCM signals are input via an
HDMI connection. You can set the level for each input to which an HDMI input jack is assigned
independently.
Preset Gain Level
You can preset the gain level for each input.
Trigger 1 to 3
You can select input options for use of the 12V Trigger function.
[91] Adjusting Settings Input Setup

Changing the name for each input (Name)

You can enter up to 8 characters for each input name.
Select [Setup] - [Input Setup] from the home menu.
1
Select the input name you want to change.
2
Select [Name].
3