Viewing Information On The Display Panel; Changing The Assignment And Display For The Input Jacks - Sony STR-ZA5000ES User Manual

You can check the remaining time before the receiver turns off on the System Setup screen. Also,
the remaining time appears on the bottom right of the TV screen when it becomes 1 minute or less.
The sleep timer will be canceled if you perform the following:
Update the software of the receiver.
Turn the receiver on or off.
[88] Using Other Features Checking information on the receiver

Viewing information on the display panel

The display panel provides various information on the status of the receiver, such as the sound
field.
1 Select the input for which you want to check information.
2 Press DISPLAY repeatedly.
Each time you press DISPLAY, the display will change cyclically as follows:
Input name you entered (*1) or default input name, Sound field currently applied (*2) →
Input name you entered (*1) or default input name, Stream information (*3) → Input name
you entered, default input name (*1)
When listening to FM and AM radio
Band, Preset number, Preset station name (*1), Sound field currently applied (*2) → Band,
Preset number, Frequency, Sound field currently applied (*2)
*1 Index name appears only when you have assigned one to the input or preset station. Index name does not
appear if only blank spaces have been entered or it is same as the input name.
[PURE DIRECT] appears on the display panel when the Pure Direct function is activated.
*2
Stream Information is not displayed when analog signals are input. This may happen even when digital signals
*3
are input.
Note
Characters or marks in some languages may not be displayed.
[89] Adjusting Settings Easy Setup
Setting up the receiver using the Easy Setup
When you turn on the receiver for the first time or after the receiver is initialized, the Easy Setup
screen appears on the TV screen. You can set up the following settings for the receiver by
following the instructions on the Easy Setup screen.
Auto Calibration
Check your speaker system and perform automatic calibration according to the configuration
and arrangement of your speaker system.
Internet Setup
Configure settings to connect the receiver to the network.
Note
Switch the input of the TV to the input to which the receiver is connected to use this function.
If the Easy Setup screen does not appear or you want to display the Easy Setup screen
manually, you can display it by selecting [Setup] - [Easy Setup] from the home menu.
[90] Adjusting Settings Input Setup
Changing the assignment and display for the input
jacks
You can customize the settings for each input according to your preferences and usage.
Select [Setup] - [Input Setup] from the home menu, then set each item shown below.
Input
You can change the settings of [Icon], [Name], [Watch/Listen], [Show/Hide], [HDMI], [OPTICAL /
COAXIAL], [COMPONENT], [VIDEO IN], [AUDIO IN], [Input Mode], [Preset Sound Field], [In-
Ceiling Speaker Mode], [A/V Sync], [Subwoofer Low Pass Filter], [Subwoofer Level], [Preset
Gain Level], [Trigger 1], [Trigger 2] and [Trigger 3] for the desired input.
Note
The settings of [AUDIO IN] on the Input Setup screen are fixed.
Icon
You can set the icon displayed on the Watch/Listen menu.