Connecting A Tv - Sony STR-ZA5000ES User Manual

○ ○ ○
(TM+RH)
7.1.4
○ ○ ○
(FD+SBD)
♦
*1 If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals, select
one of the following three connection methods: "Zone 2 connection," "front B speaker connection," or "bi-amplifier
connection."
If you are connecting speakers to SPEAKERS SURROUND BACK (FRONT B/BI-AMP/ZONE 2) terminals for
*2
Zone 2, front B speaker or bi-amplifier connection, the SPEAKERS HEIGHT 2 terminals cannot be used for
height speakers. In this case, use the PRE OUT HEIGHT 2 jacks instead.
[21] Preparation

3. Connecting a TV

Connecting a TV
Connect a TV to the HDMI OUT or MONITOR OUT jack. You can operate this receiver using
the menu on the TV screen when you connect the TV to the HDMI OUT A jack.
Be sure to disconnect the AC power cord (mains lead) before connecting cables.
Connecting a TV incompatible with the Audio Return Channel (ARC) function
via an HDMI connection
Solid lines show recommended connections and the dashed lines show alternative connections
for audio signals. It is not necessary to connect all the cables. HDMI connection for audio/video
signals is required.
Optical digital cable (not supplied)
Audio cable (not supplied)
HDMI cable (not supplied)
Note
Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Be sure to
use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet that
supports 18 Gbps is required for 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc.
Connecting a TV compatible with the Audio Return Channel (ARC) function via
an HDMI connection
With just one HDMI cable connection, you can listen to the TV audio from the speakers
connected to the receiver while the receiver sends audio and video to the TV.
HDMI cable (not supplied)
Note
Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Be sure to
use a High Speed HDMI Cable with Ethernet. Premium High Speed HDMI Cable with Ethernet that
supports 18 Gbps is required for 4K/60p 4:4:4, 4:2:2, and 4K/60p 4:2:0 10 bit, etc.
For this connection, you need to turn the Audio Return Channel function on. Press HOME to display
the home menu, select [Setup] - [HDMI Setup], and set [Audio Return Channel] to [On].
Hint
If the HDMI jack of the TV (labeled "ARC") is already connected to another device, disconnect the
device and connect the receiver.
○ ○ (TM)
-
○ ○ (FD)
-
△ (RH)
○
OUT
△
Only PRE
○
(SBD) OUT
available available
Not Not
available available