Cleaning The Motorcycle - Ducati ST3 Owner's Manual

Cleaning the motorcycle

To preserve the finish of metal parts and paintwork, wash
and clean your motorcycle at regular intervals, anyway
according to the road conditions you ride in. Use specific
products only. Prefer biodegradable products. Avoid
aggressive detergents or solvents.
Important
Do not wash your motorcycle right after use. When
E
the motorcycle is still hot, water drops will evaporate
faster and spot hot surfaces.
Never clean the motorcycle using hot or high-pressure
water jets.
Cleaning the motorcycle with water cleaners may lead to
seizure or severe failure of front fork, wheel hub assembly,
electric system, front fork seals, air inlets or exhaust
silencers and adversely affect the operation of motorcycle
safety features.
Clean off stubborn dirt or exceeding grease from engine
parts using a degreasing agent. Be sure to avoid contact
with drive parts (chain, sprockets, etc.)
Rinse with warm water and dry all surfaces with chamois
leather.
92
Warning
Braking performance may be impaired immediately
after washing the motorcycle. Never grease or lubricate
the brake discs. Loss of braking and further accidents may
occur. Clean the discs with an oil-free solvent.
Warning ST3S ABS
Carefully clean the phonic wheels of the ABS so to
ensure system efficiency. Do not use aggressive products
so to avoid damaging the phonic wheels and the sensors.