Front Fork Adjusters (St3S Abs) - Ducati ST3 Owner's Manual

Front fork adjusters (ST3S ABS)

The front fork has rebound and compression damping
adjusters. 1
A
This adjustment is done using the outer adjusters:
1) (fig. 38) to change rebound damping settings;
1
2) (fig. 38) to change spring preload settings;
3) (fig. 39) to change rebound damping settings.
Turn the adjuster (1) on fork leg top with a flat screwdriver E
to adjust rebound damping.
To reach the adjuster (3, fig. 39), insert a screwdriver into
the passing hole on the wheel shaft at fork leg axis.
As you turn the adjusting screws (1 and 3), you will hear
2
them click. Each click identifies a setting.
fig. 38
Turn the screw all the way in to set the hardest damping
(position 0).
This will be your starting point. Now turn the screw
anticlockwise and listen for the clicks that identify setting
positions no. 1, 2 and so on.
47