Video Blind Screen - Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual

7.9.4

Video Blind screen

Siemens AG
6. Highlight the desired box under the PTZ heading, and press the
Î A list of PTZ presets appear.
7. Select the preset position for each PTZ camera, where you want PTZ cameras
to move to when the DVR detects video loss on the selected camera's input.
Î
You can save your Video Loss changes by highlighting Save and pressing the
button. Selecting Cancel exits the screen without saving the changes.
1. Highlight Video Blind in the Event menu and press the
Î
The Video Blind setup screen appears.
Fig. 39 Video Blind Settings screen
Î
The DVR checks to see if anything is blinding/obscuring the camera.
Settings
1. Highlight the slider bar beside Sensitivity, and adjust the DVR's sensitivity to
video blind.
Î
The sensitivity can be set from 1 (least sensitive) to 15 (most sensitive).
2. Highlight the box under the Activation Time tab to set the duration before the
DVR will report a Video Blind.
Î
The DVR will not consider any blindness/obscuration on camera video to be
Video Blind if the blindness lasts less time than the preset Activation Time after
initial detection..
Configuration
button.
button.
45
06.2010