Alarm-Out Screen - Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual

Configuration

7.11.3 Alarm-Out screen

62
Siemens AG
NOTE
The DVR will not record audio when the recording speed is set to less than 1 ips.
Highlight Alarm-Out in the Devices menu and press the
Î
The Alarm-Out screen allows you to change the settings and establish a
schedule for each alarm output from the DVR.
Fig. 61 Alarm-Out Settings screen
The alarm output can be given its title by highlighting the box under the Title heading
and pressing the button. A virtual keyboard appears allowing you to enter the title.
Highlighting the box under the Type heading allows you to set the alarm output for
NO or NC (normally open or normally closed).
Highlighting the box beside Dwell Time and pressing the
the dwell time of the alarm output. Dwell times range from 5 seconds to 15 minutes.
Highlight the Schedule tab, and the Alarm-Out Schedule setup screen displays.
button.
button allows you to set
06.2010