Configuration
7.11.4 Remote Control screen
64
Siemens AG
Highlight Remote Control in the Devices menu and press the
Î
The Remote Control setup screen allows you to select a port and make correct
settings for a remote keyboard.
Fig. 63
Remote Control setup screen
1.
Highlight the box beside Port and select from None, RS232 and RS485.
Î
If the RS232 port and RS485 port are in use for PTZ control, networking or text
input, the remote keyboard cannot be configured.
2.
Highlight Setup... and select the correct Baud Rate, Parity, Data Bits and Stop
Bits for the device you are connecting to the DVR.
3.
Highlight the box beside Remote Control Product and select the device from
the list.
Î
You can save your Remote Control settings by highlighting Save and pressing
the
button.
Î
Selecting Cancel exits the screen without saving the changes.
button.
06.2010