Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual page 24

Configuration
24
Siemens AG
When the DVR is in the Event mode, the red
corner of the screen. The DVR will record and displays the
left corner of the screen when any event occurs. When the DVR is in the Pre-
Event recoding mode, the yellow
the DVR is not recording. When the DVR is in the Pre-Event mode, the red
and display when any event occurs and the DVR starts recording.
When the DVR is in the Time & Event mode, the DVR will follow the Time
settings and the
icon displays.
5. Highlight the box under the Channels heading and press the
which cameras will be recorded (Simple Mode only).
6. Highlight the box under the Settings heading and press the
the recording settings.
Î
You can set the ips and quality of the recording for any modes you set up in the
Mode column. If you do not set the ips and quality in the Settings column, the
DVR will follow the default settings. See below for details.
Fig. 12 Schedule – setup screen (Advanced Mode)
Time-lapse (Time)
Alarm-In
Motion
NOTE
Channels that are not defined will use the setting values of the previous schedule item..
NOTE
When multiple events are detected at the same time from a specific channel, the DVR will record
event video with the high setting values if the ips, Quality, Resolution and Dwell values of events are
different from each other. However, the ips will be reset to the supported maximum value when the
ips, Quality, Resolution and Dwell are set to the highest value (Advanced Mode only).
icon displays when there is no event, and
icon displays. The DVR follows the Event settings and the
icon displays at the top-left
icon at the top-
button to select
button to define
Video Loss
Video Blind
Text-In
06.2010