Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual page 29

Siemens AG
3. Highlight the box beside SMTP Server and press the
Î
A virtual keyboard appears that you can use to enter the IP address or domain
name of the SMTP server.
NOTE
You will need to get the IP Address or domain name of the SMTP Server from your network
administrator.
NOTE
You can use the domain name instead of IP address if you already set up the DNS Server when
setting up the LAN.
4. Use the arrow buttons to enter the SMTP Server IP address obtained from your
system administrator.
5. Highlight the box beside Port and press the
6. Use the arrow buttons to enter the SMTP Server port number obtained from
your system administrator. The default port number is 25.
7. Highlight Use SSL/TLS and press the
Î
When it is On, the DVR can send an email via an SMTP server requiring SSL
(Secure Sockets Layer) authentication.
8. Highlight the box beside Authentication and press the
Î An Authentication screen appears.
9. Highlight Use and press the
10. Highlight the box beside User/Password and press the
Î
A virtual keyboard appears allowing you to enter the user ID and password.
Fig. 18 Authentication setup screen
11. Highlight the box beside Sender and enter the sender's e-mail address.
12. Use the virtual keyboard to enter the e-mail address.
NOTE
The e-mail address must include the "@" character to be a valid address.
13. Highlight the box beside Recipient and enter the recipient's e-mail address.
14. Use the virtual keyboard to enter the e-mail address.
15. Highlight the Test box and press the
settings you made. Refer to 11.7 Error code notices for the description of SW
error codes or the common SMTP response codes for the description of SMTP
response codes for the email test
button.
button to toggle between On and Off.
button to toggle between On and Off.
button to test emailing with the current
.
Configuration
button.
button.
button.
29
06.2010