Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual page 33

Siemens AG
Fig. 22 Port Numbers setup screen
6. Change the numbers by highlighting them and using the Up and Down arrow
buttons to increase or decrease the number.
The factory default port settings are:
Remote Admin:
Remote Callback:
Remote Watch:
Remote Search:
NOTE
The system restarts automatically after changing the port settings.
NOTE
Do NOT use the same port number for two different programs, otherwise, the DVR cannot be
connected with the PC running RAS or Web Client.
NOTE
When changing the port settings, you must change the port settings on the PC running RAS or Web
Client as well. Refer to the RAS manual for details.
Î
Selecting "DHCP" from the Type and highlighting the Save button reads the
current IP address of the DVR configured by DHCP (Dynamic Host
Configuration Protocol) network.
Fig. 23 LAN (DHCP) setup screen
8200
8201
8016
10019
Configuration
33
06.2010