Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual page 74

Configuration
74
Siemens AG
Fig. 77 Time Sync. screen
Time Sync.
1. Highlight the box beside Automatic Sync. and press the
Î
This toggles between On and Off.
2. Highlight the box beside Time Server and press the
Î
A virtual keyboard appears that you can use to enter the IP address or domain
name of the time server.
NOTE
You can use the domain name instead of IP address if you already set up the DNS Server when
setting up the LAN.
3. Change the numbers by highlighting them and using the Up and Down arrow
buttons to increase or decrease the number value.
4. Highlight the box beside Interval and press the
5. Set the time interval for synchronization from 30 minutes to 1 day at various
time intervals.
Î
Last Sync-Time displays the last time the DVR was synchronized with the time
server.
6. Highlight Run as Server and press the
Î Pressing the button toggles between On and Off. When it is On, the DVR you
are setting up will run as a time server.
Î
You can save your changes by highlighting Save and pressing the
Î
Selecting Cancel exits the screen without saving the changes.
button.
button.
button.
button.
button.
06.2010