Table of Contents
Advertisement
Configuration
38
Siemens AG
NOTE
For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in
the Alarm-Out setup screen (Schedule tab).
6.
Highlight the desired box under the Notify heading, and press the
Î
The Alarm-In Notify menu appears.
Fig. 29
Alarm-In Notify menu
You can toggle the entire list On and Off by highlighting Notification and
pressing the
button. You can toggle the individual items On and Off by
highlighting that item and pressing the
7.
Highlight OK and press the
NOTE
For the Notify action, the notify item you select should be enabled in the Notification setup screen
and the DVR should be registered in the RAS (Remote Administration System).
8.
Highlight the desired box under the PTZ heading, and press the
Î
A list of PTZ presets appear.
9.
Select the preset position for each PTZ camera, where you want PTZ cameras
to move to whenever the DVR detects an input on the associated alarm input.
Î
You can save your Alarm-In changes by highlighting Save and pressing .
Î
Selecting Cancel exits the screen without saving the changes.
button.
button to accept your changes.
button.
button.
06.2010
Hide quick links:
Advertisement
Table of Contents
