Ddns - Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual

7.8.3

DDNS

Siemens AG
1. Highlight DDNS in the Network menu and press the
Î
The DDNS setup screen displays.
Fig. 25 DDNS Setup Screen
2. Highlight the box beside the ID and press the
Î
A virtual keyboard appears allowing you to enter the ID which used to log in the
DDNS server.
3. Highlight the box beside Password and press the
Î A virtual keyboard appears allowing you to enter the password which is used to
log in the DDNS server.
4. Highlight the box beside Confirm and press the
Î
A virtual keyboard appears allowing you to enter the password again to confirm
it.
5. Highlight Use NAT and press the
Î
Status displays a message to inform you whether or not the setting you entered
is correct after the settings are saved by highlighting Save and pressing the
button.
NOTE
One DDNS server is currently supported for the DDNS feature: www.dyndns.com.
NOTE
You are required to log in the DDNS server to register a DVR hostname on the DDNS server.
NOTE
When using the NAT (Network Address Translation) device, refer to the NAT manufacturer's
instructions for proper network settings.
button.
button.
button.
button.
button to toggle between On and Off.
Configuration
35
06.2010