Table of Contents
Advertisement
Configuration
28
Siemens AG
NOTE
Depending on network conditions, audio might be interrupted or out of synchronization during
transmission.
NOTE
When limiting the network bandwidth, the remote watch image on the PC running RAS or Web Client
may not be displayed properly.
8.
Highlight Enable SSL for Transferring Data and press the
between On and Off. When it is On, the security of data except video and audio
transmitted for remote monitoring or remote recording can be enhanced by
using the SSL (Secure Sockets Layer) authentication. When using the SSL
function, the DVR cannot be connected with a remote program which does not
support the SSL function.
NOTE
The remote connection will be disconnected temporarily after changing the SSL settings.
NOTE
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org).
9.
Highlight the Mail tab, and the Mail screen displays.
Î
The DVR can be set up to send an email when an event occurs.
Fig. 17
Mail setup screen
Mail
1.
Highlight Enable and press the
Î
You will only be able to change the settings if Mail is enabled.
2.
Highlight the Manual box and press the
provider appears. Selecting an email service provider from the list automatically
sets up the SMTP server, port and SSL/TLS usage settings. Selecting Manual
allows you to enter the settings manually
button to toggle between On and Off.
button. A list of email service
.
button to toggle
06.2010
Hide quick links:
Advertisement
Table of Contents
