Pre-Event Screen - Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual

7.7.3

Pre-Event screen

Siemens AG
7. Highlight the box under the
recording settings.
Î You will be asked to confirm that you want to delete the settings.
8. Highlight Default... and press the
Î
The Default screen appears.
Fig. 13 Default setup screen
Highlighting boxes under ips and pressing the
images per second for Time and Event recording. You can select from 0.10 to
25.0 (30.0 for NTSC) images per second.
Highlighting boxes under Quality and pressing the
the recorded image quality for Time and Event recording. You can select from:
Very High, High, Standard and Basic.
Highlighting boxes under Dwell and pressing the
length of time you would like to record for the associated event (Advanced
Mode only).
Î
You can save your changes by highlighting OK and pressing the
Î
Selecting Cancel exits the screen without saving the changes.
Highlight Pre-Event in the Record menu and press the
Î
The Pre-Event setup screen appears.
Î
If you do not have Event set up in the Record Schedule, a message will display
alerting you to this fact.
heading and press the
button.
button allows you to set the
button allows you to set the
Configuration
button to delete the
button allows you to set
button.
button.
06.2010
25