Web Client - Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual

11.3

Web Client

Siemens AG
Web Client allows you to access a remote DVR, monitor live video images and
search recorded video using Internet Explorer web browser anytime from virtually
anywhere.
Computer system requirements for using Web Client are:
z
Operating System: Microsoft
® ®
Microsoft Windows
z
CPU: Intel Pentium III (Celeron) 600 MHz or faster
z
RAM: 128 MB or higher
z
VGA: 8 MB or higher (1024x768, 24 bpp or higher)
z
Internet Explorer: Version 6.0 or later
Start Internet Explorer on your local PC and enter "http://IP address:port number"
(The DVR IP address and the Web Client port number (default: 12088) set in the
Network setup screen (Web Client tab)) in the address field.
NOTE
You will need to get the appropriate IP address for the DVR you want to connect to and the Web
Client port number from your network administrator.
NOTE
Web Client only works with Microsoft Internet Explorer and will NOT work with Netscape or other
browsers.
Select between the WEBVIEW (Web monitoring) and WEBPLAY (Web search)
modes. Entering your ID and PASSWORD and clicking the [LOGIN] button logs in
using the selected mode.
NOTE
Do NOT close the LOGIN window during the WebGuard operation, otherwise, it will cause a script error
when switching between Web monitoring and Web search modes, and you will need to restart the WebGuard
program.
NOTE
When running the updated Web Client for the first time, Internet Explorer might occasionally load the
information of the previous version. In this case, delete the temporary Internet files by selecting Tools
Æ Internet Options Æ General tab, and then run Web Client again.
® ®
Windows 2000, Microsoft
Vista
Appendix
® ®
Windows XP or
107
06.2010