Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual page 37

Siemens AG
Settings
1. Highlight the desired Title box and press the
Î
A virtual keyboard appears allowing you to enter a title name.
Î Each input can be set as NO (normally open) or NC (normally closed).
2. Highlight the Actions tab.
Î The Actions setup screen appears.
Fig. 28 Alarm-In Actions screen
You can set the DVR to start panic recording whenever it senses an input on one of
its alarm input connectors.
1. Highlight the desired box under the Panic Record heading, and press the
button.
Î
A list of alarm inputs appears, and you can select which alarm input you want
associated with panic recording. The DVR will continue panic recording until an
input on the selected alarm input is released as long as the Panic button is not
pressed to stop the panic recording.
You can set the actions the DVR will take whenever it senses an input on one of its
alarm input connectors.
2. Highlight the desired box under the Record heading, and press the
Î
A list of cameras appears.
3. Select the cameras that you want the DVR to record whenever it detects an
input on the associated alarm input.
NOTE
For the Record action, the camera you select should be set to the Event or Time & Event recording
mode in the Record Schedule setup screen.
4. Highlight the desired box under the Alarm-Out heading, and press the
button.
5. Select between Alarm Output and Beep (DVR's internal buzzer) that you would
like to activate whenever the DVR detects an input on the associated alarm
input.
Configuration
button.
button.
37
06.2010