Nagra Seven Operating Instructions Manual page 96

CHAPTER V
ERROR MESSAGES AND PROBLEM SOLVING
Error messages on the Nagra Seven appear on the main display irrespective of the current operating mode of
the recorder. Generally speaking they are self-explanatory and do not need any additional information.
However some additional information on certain messages is listed here:
Message
"Aborted"
"AES: no signal"
"AES: slipping"
"AES: SRC unlock"
"Buffer overflow"
"Copying"
"Copy Error"
"Copy Error: List full"
"Copying"
"Autocopy:
Destination error"
"Copy Destination
Full"
"Creating error"
"Deleting Error"
"Disk Busy"
"Disk full"
"Directory full"
Chapter V
Reason and solution
The copy process was requested to stop by the user, cleaning of the partially copied
index.
The AES input has been selected and no signal is present.
The AES signal is slipping with respect to the selected reference.
The internal sample rate converter is not synchronized.
The audio buffer is full due to media problems.
Attempt to DELETE or RENUMBER indexes or SELECT, RENAME or ERASE a folder
while the selected indexes or folder is still in the copy list.
You have put the Nagra Seven in power off and it has not yet finished to copy, this is
not really an error message in this case. (see copy section).
A copy was stopped because a copy error occurred.
A copy was stopped because too many copy operations have been chosen. (See
Copy section).
The copy process is running.
The destination media for the copy manager is not present.
The destination media for the copy manager is full.
The destination disk is certainly either not present or not formatted.
Insert a formatted compact flash card.
Initially use the RETRY function. If the error re-appears your disk
may be damaged.
Index with file attributes set to read-only can cause this error; this problem must be
resolved with a PC as file attributes cannot be altered using the Nagra Seven.
Media not ready.
Selected working drive is at maximum capacity.
Will be displayed when the Nagra Seven is set to pre-record / record for the 9
th
299 file in the current working folder. Delete unnecessary folders / indexes on your
destination media. (Maximum allowed number of entries is 999)
95
SOLUTIONS
March 2014