Time Code Lemo Connector - Nagra Seven Operating Instructions Manual

Time code LEMO connector

WCK IN / OUT
WiFi / GSM / 3G antennae
I.S.D.N. connector
Chapter II
The time code input and output is located on a traditional 5-pole
LEMO connector, the pinning of which corresponds to that of all
previous Nagra TC models.
(QCTCU cable # 70 16909 000 – LEMO to "open-ended" TC cable)
The two BNC connectors form part of the TC option and are the
standard external word clock refernce connectors for locking the
Nagra to an external reference and for supplying such a reference to
other equipment. Other reference signals such as PAL / NTSC video,
HDTV references are also fed to the recorder through the WCK IN
connector, in video applications.
These are the antennae connections that form part of the WiFi / GSM
option. A pair of antennae is delivered with the option. The gold antenna is
for the WiFi and the steel (Silver) antenna is for the 3G communication.
Replacement GSM and WiFi 3G antennae kit: 20 19180 008
The RJ45 connector is part of the I.S.D.N. system and is only available on
machines equipped with this option. This is where the ISDN line is
connected to the NT.
13 March 2014