Nagra Seven Operating Instructions Manual page 68

Some examples: For a playback shoot:
If the audio track to be played back was initially recorded at 95.904 kHz (96 - 0.1%), you should set the Nagra
to master -0.1% and the time code to 30 ND
If the audio track to be played back was initially recorded at 95.904 kHz and the Nagra Seven is slaved from a
95.904 external clock, you should set the Nagra to "ext. 96" kHz and the time code to 30 ND (the time code will
run at the external frequency speed)
If the audio track to be played back was initially recorded at 96 KHz (trans-sampled from 95.904 kHz to 96.000
kHz) you should set the Nagra to master and the time code to 29.97 ND
Chapter IV 67 March 2014