Nagra Seven Operating Instructions Manual page 46

Drives
Location of the internal 16 GB micro SD card when the
top of the machine is removed. The Micro SD card
Is located just below the circuit board and is removed
By simply pulling it gently away from the circuit.
The drives window gives information about the connected media. "INT" refers to the internal 16 GB micro SD
memory card. SD refers to the extractable SD media and USB refers to any external hard drive or USB memory
stick connected to the USB port. The green "check" indicates the currently selected working drive (media). As
shown below, the total size of the media as well as the remaining unused space is clearly shown for each
media.
Chapter III September 2014
45