The Main Screen; Menu Button - Nagra Seven Operating Instructions Manual

The main screen

The central area (shown in grey) of the home screen can be programmed in the "Home screen menu" to
display up to three different sets of information, which will be scrolled through each time the central section of
the display is touched.
The available displays depend on the options installed in the machine.
The example below shows the home screen of a NON-TC Nagra Seven, where the "Counter and settings"
display selection has been chosen.
Current time (RTC)
Monitoring
format
Current
operating mode

Menu button

Selection zone
Index / counter
File data
Transport keys
Below is the home screen of a TC machine with the "Time code and settings" display selected.
Time code
information
Along the top, the status bar remains the same on all displays and shows the current time, the recording media
and data folder in use, remaining recording time (according to current file format and media size) and the
status of the battery / power source.
On the second line of the display, the current operating mode, monitoring format, the modulometers for audio
levels with peak indicators are shown as well as the
The central section is programmable in the display menu screen (described later) and the bottom line shows
the transport functions / action buttons (depending on main selector position) and user selectable shortcut
keys.
Chapter III
Selected media and folder
16
Remaining time Power source /
Icon to enter the MENU mode.
Battery status
Modulometers
Status
Shortcut
Icons
September 2014