Network
Users can configure Ethernet settings, Wi-Fi, VPN, PPPoE and other advanced network settings here.
Ethernet Settings
•
Preferred Internet Protocol: Selects which Internet protocol to use. When both IPv4 and IPv6 are
enabled, the GAC2570 attempts to use preferred protocol first and switches to the other choice if it fails.
•
IPv4 Settings: Here user can configure the IPv4 address Type.
If DHCP is selected, the GAC2570 will get an IP address automatically from the DHCP
o
server in the network. This is the default mode.
If Static IP is selected, manually enter the information for IP Address, Subnet Mask, Default
o
Gateway, DNS Server, and Alternative DNS server.
If PPPoE is selected, type PPPoE Account ID and PPPoE Password provided from the
o
PPPoE server to get authenticated for network access.
•
IPv6 Settings: Here user can configure the IPv6 address Type.
If Auto-Configured is selected, the GAC2570 will get an IP address automatically from
o
the DHCP server in the network. This is the default mode.
Figure 13: Network – Ethernet Settings
GAC2570 User Manual
Version 1.0.1.23
P a g e
|
32