Maintenance/Recording; Maintenance/Time & Language - Grandstream Networks GVC3200 Administration Manual

Advanced Settings
It is used to configure whether to validate the server certificate when download the
Validate Server
firmware/config file. If set to "Yes", the device will download the firmware/config file
Certificate
only from the legitimate server. The default setting is "No".
It is used to set if the device will broadcast the Multicast DNS (mDNS) message
during booting up to allow itself to be discovered and be configured by the SIP
mDNS Override
platform. If it is set to "User Type A', the device will broadcast the MDNS message
Server
"A_grandstream-cfg.local"; if it is set to "Use Type SRV", the MDNS message will be
"SRV_grandstream-cfg.local". The default setting is "Use Type A".
It is used to set if the device allows the DHCP offer message to override the Config
DHCP Option 66
Server Path via the Option 66 header. The device supports both TFTP and HTTP
Override Server
method via Option 66. The default setting is "Yes".
It is used to set if the device will broadcast the SIP SUBSCRIBE message during
3CX Auto
booting up to allow itself to be discovered and be configured by the SIP platform.
Provision
The default setting is "Yes".
Disable SIP
If set to "Yes", the device will not challenge NOTIFY with 401 authentication. The
NOTIFY
default setting is "No".
Authentication
It is used to reset the device to the default factory setting mode. If the "Clear the SD
Factory Reset
card" is checked, the SD card storage mounted to the device will be format as well.

MAINTENANCE/RECORDING

Users could find recording files on this web page, download the file to PC to listen to or delete the files.
The recording files are stored in external SD card plugged into the GVC3200/GVC3202.
MAINTENANCE/TIME & LANGUAGE
Parameters Descriptions
It is used to define the URL or IP address of the NTP server 1. The device may
Assign NTP Server
obtain t
Address 1
"us.pool.ntp.org".
Assign NTP Server It is used to define the URL or IP address of the NTP server 2. The default setting is
Address 2 empty.
Set Date Manually set the current date for device.
Firmware Version 1.0.1.48
www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
he current date and time information from the server. The default setting is
GVC3200/GVC3202 Administration Guide Page 58 of 71