Settings/Sip/Call - Grandstream Networks GVC3200 Administration Manual

It is used to set if the device will enable the SRTP (Secured RTP) mode. It can be
selected from dropdown list:
 Disable
 Enabled but not forced
SRTP Mode
 Enabled and forced
SRTP uses encryption and authentication to minimize the risk of denial of service.
(DoS). If the server allows to use both RTP and SRTP, it should be configured as
"Enabled but not forced". The default setting is "Enabled But Not Force".
It is to configure all the AES (Advanced Encryption Standard) key size within SRTP.
It can be selected from dropdown list:
 AES 128&256 bit
 AES 128 bit
 AES 256 bit
SRTP Key Length
If it is set to "AES 128&256 bit", the device will provides both AES 128 and 256
cipher suite for SRTP. If set to "AES 128 bit", it only provides 128 bit cipher suite; if
set to "AES 256 bit", it only provides 256 bit cipher suite. The default setting is "AES
128&256 bit".

SETTINGS/SIP/CALL

Parameters Descriptions
It is used to set the preference to handle video request from the remote party during
an audio call. It can be selected from the dropdown list.
 "Prompt": A message will be prompted if a video request is received. Users can
Remote Video
 "Accept": Video request will be accepted automatically and video will be
Request
 "Deny": Video request will be rejected automatically.
The default setting is "prompt".
It is used to configure the prefix to be added to each dialed number. All numbers use
Dial Plan Prefix this account will automatically add the prefix. e.g.: The prefix is 5, the phone number
is 337, and then the dial number is 5337.
Firmware Version 1.0.1.48
www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
select "Yes" to establish video or "No" to reject the request.
established.
GVC3200/GVC3202 Administration Guide Page 46 of 71