Settings/General Settings - Grandstream Networks GVC3200 Administration Manual

It is used to set what characters will be included in the SIP INVITE URI if end users
Escape '#' as %23
input #. If it is set to "Yes", the device will replace the # by %23. Otherwise, it will
in SIP URI
include # in the SIP INVITE message. The default setting is "Yes".

SETTINGS/GENERAL SETTINGS

Parameters Descriptions
Power Management
Specifies the period before the device enters sleep mode if no operation is
performed.
If set "Never", the device will never enter sleep mode automatically. The default
Enter Sleep Mode value is "Never". If the device enters sleep mode, press POWER button on the
(Min.) remote control to boot up.
When the device is in sleep mode, there is no display on the display device and web
UI access is not available for remote access. Users must use the remote control to
wake up the device or reboot the device.
Site Name Settings
Background Set the display background transparency to be Opaque, 5%, 10%,15% and 20%.
Transparency The default setting is "Opaque".
Specifies the site name to be imposed on the video of local video. When joining a
multipoint conference, this site name is displayed in other participants' video.
The default value is null.
Site Name
Note:
Please do not use any special characters in this site name, such as a colon (:),
comma (,), hyphen (-), or underline (_).
It is used to configure the site name's position to be at Upper Left Corner, Upper
Display Position Right Corner, Lower Left Corner or Lower Right Corner on the video. The default
setting is "Upper Left Corner".
It is used to configure the duration to display the site name. The options are "Do Not
Display", "1 Minute", "5 Minutes", "10 Minutes" or "Always Display". The default
Display Duration
setting is "Always Display".
It is used to specify the color in which the site name is displayed. Click on the field
Font Color
and color selection will be available for the user to choose. The default color is white.
It is used to specify the font size for the site name display. The user could select
Font Size
from the smallest to the largest. The default value is Medium.
It is used to specify whether the site name is displayed in bold. The default value is
Bold
No.
Firmware Version 1.0.1.48
www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
GVC3200/GVC3202 Administration Guide Page 53 of 71