Remote Control Upgrade - Grandstream Networks GVC3200 Administration Manual

configuration parameter is associated with each particular field on the web configuration page. A
parameter consists of a Capital letter P and 2 to 4 digit numeric numbers. i.e., P2 is associated with the
"Admin Password" in the Web GUI->Maintenance->Web/SSH Access page. For a detailed parameter list,
please refer to the corresponding firmware release configuration template in the following link:
http://www.grandstream.com/support/tools
When the GVC3200/GVC3202 boots up, it will issue TFTP or HTTP request to download a configuration
XML file named "cfgxxxxxxxxxxxx" followed by "cfgxxxxxxxxxxxx.xml", where "xxxxxxxxxxxx" is the MAC
address of the device, i.e., "cfg000b820102ab" or "cfg000b820102ab.xml". If downloading
"cfgxxxxxxxxxxxx.xml" file is not successful, the provision program will download a generic cfg.xml file.
The configuration file name should be in lower case letters. For more details on XML provisioning, please
refer to the following document:
http://www.grandstream.com/general/gs_provisioning_guide_public.pdf

REMOTE CONTROL UPGRADE

The GVC3200/GVC3202 remote control firmware is embedded with GVC3200/GVC3202 firmware. When
GVC3200/GVC3202 detects a new firmware version for the connected Bluetooth remote control, a prompt
box will pop up on screen to remind users whether to upgrade the remote control. Tap on OK to upgrade,
or tap on CANCEL to reject.
Users could also check remote control firmware update manually in LCD menu->Settings->Status-
>Remote Control and click "Check for Updates". If there is a new version, follow the prompts on the
screen to download remote control update and upgrade. Network connection and remote control
connection will be temporarily lost during remote control upgrade. Both connections will be restored
automatically once upgrading is done.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
Please do not cut off GVC3200/GVC3202 power supply or remove remote control battery during remote
control upgrading process. Otherwise, the upgrading process will be interrupted and upgrading will fail.
----------------------------------------------------------------------------------------------------------------------------- ---------------
Firmware Version 1.0.1.48 GVC3200/GVC3202 Administration Guide Page 67 of 71
www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299