E-117 TRI 285A / 285B: 5. Seat Post Installation
5Nm
1. Unscrew main bolt (A) as far as
5Nm
possible without fully removing from
the lock nut.
B
2. Install the saddle rails into the
seatpost clamp (B).
3. Slide saddle clamp (B) onto rocker (C).
4. Tighten the bolt up at 12Nm.
GRIP PASTE
A
See p.25 for saddle adjustment.
C
12Nm
IMPORTANT:
The E-117 Tri+'s saddle rail clamp is
made for aluminum and round-shaped
GRIP PASTE
saddle rails (For part numbers contact
Ritchey).
For other types of saddle rails, please
refer to the Tips and Troubleshooting
section of this Assembly Guide (p.26).
6