Power Supply; Preparation Power Supply - Panasonic AJ-HPX2000 Operating Instructions Manual

A battery pack or an external DC power supply can be used as AJ-HPX2000's power supply.
Using a Battery Pack
Battery packs from the following manufacturers can be
used:
•
Anton/Bauer
•
IDX
•
PACO
•
Sony
The type of the battery can be checked or changed
through the viewfinder or menu screen on the monitor.
Pressing the MODE CHECK button on the side of the
camera-recorder displays the current type of the battery
in the upper right corner of the viewfinder display.
Navigate the menu to open the BATTERY/P2CARD
screen from the MAIN OPERATION page. Then, through
the BATTERY SELECT menu option, you can check and
change the battery type.
# < BATTERY/P2CARD >
BATTERY SELECT
EXT DC IN SELECT
BATT NEAR END ALARM :OFF
BATT NEAR END CANCEL:ON
BATT END ALARM
BATT REMAIN FULL
CARD NEAR END ALARM :ON
CARD NEAR END TIME
CARD END ALARM
CARD REMAIN/
Notes
Other batteries may be used by changing the menu
setting, but system compatibility is not guaranteed.
Charge the battery pack with the battery charger before
using it. (Please refer to the battery charger's instruction
manual for information about charging.)
Preparation

Power Supply

:DIONIC90
:AC-ADPT
:ON
:70%
:2min
:ON
:3min/
Preparation ：Power Supply
97