Sd Memory Card Status Display - Panasonic AJ-HPX2000 Operating Instructions Manual

SD memory card Status Display

The status display enables a confirmation of the SD
memory card formatted condition, available memory
capacity etc.
From the thumbnail menu, select PROPERTY >
DEVICES > SD CARD.
If the format is compatible with SD standards, the message
"SD STANDARD: SUPPORTED" is displayed.
If the format is not compatible with SD standards, the
message "SD STANDARD: NOT SUPPORTED" is
displayed. If this is the case, writing or reading will not be
successful. Format the card with the AJ-HPX2000. For
more on formatting SD memory cards, see [Formatting SD
memory cards] (page 123).
Video Encoder Card Status Display (optional)
Attaching the video encoder card (AJ-YAX800G, optional),
select PROPERTY > DEVICES > PROXY from the
thumbnail menu.
The slot in which the video encoder card is inserted, and
version information is displayed.
128 Manipulating Clips with Thumbnails : Properties
Note
The indicated remaining memory capacity on the SD
memory card (PROXY REM) can be an index of remaining
memory capacity for the Proxy but may differ from the
actual remaining capacity. For SD or SDHC cards with
Class indications, the recording time may be reduced
significantly compared with the actual capacity when
images of short recording time are recorded repeatedly. If
the remaining memory capacity exceeds 999 min, "999
min" is displayed.
The remaining capacity is displayed only when set to
record the Proxy record on the SD memory card. For the
setting method, refer to the operation manual of the video
encoder card (the optional AJ-YAX800G).