Audio (Output) Function Section - Panasonic AJ-HPX2000 Operating Instructions Manual

Audio (output) Function Section

9.
AUDIO OUT connector (XLR, 5-pin)
This connector outputs audio signals recorded on
Channels 1/2 or 3/4.
Output signals are selected with the MONITOR
SELECT CH1/2 / CH3/4 selector switch.
10.
MONITOR SELECT (audio channel) CH1/2 /
CH3/4 selector switch
Use this switch to select the audio channel whose
signals are output to the speakers, earphones or
AUDIO OUT connector.
CH1/2: Signals on Audio Channels 1 and 2 are output.
CH3/4: Signals on Audio Channels 3 and 4 are output.
The channel indications on the display window and on
the audio level
synchronised with this selector switch.
11.
MONITOR SELECT (audio selection) CH1/3 /
ST / CH2/4 selector switch
The MONITOR SELECT switch is synchronised with
the audio signal output to the speakers and
earphones, and from the AUDIO OUT connector.
CH1/3: Signal on Audio Channel 1 or 3 is output.
ST: Stereo audio signals on Audio Channels 1
and 2 or Audio Channels 3 or 4 are output.
The stereo signals can be changed to mixed
signals using a menu option.
CH2/4: Signal on Audio Channel 2 or 4 is output.
Monitor
switch
CH1/2
CH1/3 Audio Channel 1
Stereo signals from
ST
Audio Channels 1 and 2*
CH2/4 Audio Channel 2
* You can select between stereo and mixed signal types
using the menu option MONITOR SELECT. This menu
option can be found in the <MIC/AUDIO2> screen on the
MAIN OPERATION page.
12.
MONITOR (volume) control
Used to control the volume of sound output from the
monitor speakers and earphones.
13.
ALARM (warning alarm volume adjustment)
Used to control the volume of the warning sound
emitted from 14. speakers or earphones connected to
the 15. PHONES jack.
If the control is minimised, no alarm is audible.
16
Parts and their Functions ： Audio (output) Function Section
meter in the viewfinder
MONITOR SELECT switch
CH3/4
Audio Channel 3
Stereo signals from
Audio Channels 3 and 4*
Audio Channel 4
14.
Speakers
The speakers output EE sound during recording, and
reproduced sound during playback.
The speakers emit an alarm sound when the warning
lamp blinks and/or the indicator activates.
When the 15. PHONES jack is connected with
earphones, sound from the speaker is automatically
muted.
15.
PHONES (earphones) jack (mini jack)
This connector is designed for audio monitoring
(stereo) earphones. When earphones are connected,
sound from the speakers is automatically muted.
Both the front and rear connectors output the same
sound.
are