Mounting The Camera On A Tripod - Panasonic AJ-HPX2000 Operating Instructions Manual

When Using Audio Devices
1
Connect the audio device to the AUDIO IN jack with
the XLR cable.
2
Set the AUDIO IN switch to [REAR] for the channel to
which the XLR cable is connected.
3
Set the LINE/MIC/+48V selector switch on the rear
panel to [LINE].

Mounting the Camera on a Tripod

When mounting the camera on a tripod, use the tripod adapter supplied with the camera.
1
Mount the tripod adapter on the tripod.
Tripod Adapter
Note
Select an appropriate hole in the adapter, taking into
account the center of gravity of the camera and tripod
adapter combined.
Also, make sure that the diameter of the selected hole
matches the diameter of the pan head screw.
2
Mount the camera on the tripod adapter.
Slide the camera forward along the grooves until you
hear a "click".
Pan head
While holding the red lever down, move the black lever in
the direction of the arrow, and slide the camera backward
to remove it.
If the tripod adapter pin does not return to its original
position after the camera has been removed, hold the red
lever down and move the black lever in the direction of the
arrow again, in order to return the pin to its original
position.
Please note that the camera cannot be mounted if the pin
remains in the center.
AUDIO IN
Switch
Removing the Camera from the Tripod Adapter
Tripod Adapter
Red Lever
Note
Preparation ：Mounting the Camera on a Tripod
LINE/MIC/+48V
Selector Switch
AUDIO IN Jack
Black Lever
105