Menu Description Tables - Panasonic AJ-HPX2000 Operating Instructions Manual

Menu Description Tables

SYSTEM SETTING
SYSTEM MODE
Items/ Adjustable
Data Saved Range
For setting the system frequency and the
SYSTEM 1080-59.94i
recording format of the unit.
MODE 1080-50i
When this item is switched, turn "OFF"
720-59.94P
the POWER switch on the unit and then
720-50P
turn it "ON" again.
480-59.94i
Notes
576-50i
When the remote control unit (AJ-
RC10G) is connected, this item is not
displayed.
To switch this item, operate the main
unit independently.
When the time code is in free run
mode and a change is made to the
SYSTEM MODE menu option, the
time may not be correctly recorded.
After turning on the camera-recorder,
check the time code and make a
change to the setting if required.
When USB DEVICE mode is selected,
no change can be made to this option.
– C U F –
REC SIGNAL CAM Select video input signals.
CAM : Record the signal from the
VIDEO
1394
VIDEO:Record the signal from the
SDI
1394: Record the signal from the 1394
SDI: Records input to the SDI IN
Notes
In Native mode for the AVC-Intra
(optional) and DVCPRO HD, 1394
cannot be selected.
After the power has been turned OFF,
this setting defaults to CAM when the
power is turned ON again.
In order to select VIDEO and
synchronize video signals input to the
GENLOCK IN connector (VBS) with
the unit, set the GENLOCK item of
[ GENLOCK ] (page 159) to "EXT".
– C U F R
For setting the video system for
CAMERA (1080-59.94i
shooting.
MODE /480-59.94i)
Note
60i
In AVC-Intra mode (optional), 24PA
30P
cannot be selected.
24P
24PA
(1080-50i
/576-50i)
50i
25P
(720-59.94P)
60P
30P
24P
(720-50P)
50P
– C U F R
25P
Remarks
camera
GENLOCK IN connector (In SD
mode only ）
input connector
connector (optional).
Items/ Adjustable
Data Saved Range
16:9 Select the aspect ratio for recording. (In
ASPECT
4:3
SD mode only ）
16:9: Record in <16:9> aspect ratio.
4:3: Record in <4:3> aspect ratio.
– C U F R
Specify the type of viewfinder to be
VF TYPE HD
attached to the camera-recorder.
SD
– C U F R
REC MODE HD MODE Select the recording mode.
DVCPRO HD:
(1080i):
DVCPRO HD Record in DVCPRO HD format
DVC HD (N):
AVC-I 100
AVC-I 50
Record in Native mode for DVCPRO
HD MODE
HD
(720P):
AVC-I 100:
DVCPRO HD
Record in AVC-I 100 format
DVC HD (N)
AVC-I 50:
AVC-I 100
Record in AVC-I 50 format
AVC-I 50
DVCPRO50:
SD MODE:
Record in DVCPRO50 format.
DVCPRO50
DVCPRO:
DVCPRO
Record in DVCPRO format.
DV
DV:
Notes
AVC-I 100 and AVC-I 50 cannot be
selected when the AJ-YBX200G
(optional) is not installed.
If [1394] is selected in REC SIGNAL,
AVC-I 100, AVC-I 50 and DVC HD (N)
cannot be selected.
– C U F R
Switch the setup. (For 480-59.94i only ）
SETUP 0%
0%:
7.5%A
7.5%A: Setup is switched to 7.5% for the
– C U F R
PC MODE USB HOST Specify the operation mode of the
USB DEV. camera-recorder when an external
SELECT
device is connected via USB.
USB HOST:
Sets the camera-recorder to the mode
that allows an external hard disk drive
to be connected.
USB DEV.:
Sets the camera-recorder to the USB
device mode, which allows a PC to be
connected via USB 2.0 for use with
P2 cards as mass storage.
Note
When the PC MODE menu option is set
to ON, no change can be made to this
– – – F –
option.
The ____ in the Adjustable Range column indicates the
preset mode.
Menu : Menu Description Tables
Remarks
Record in DV format.
Setup is switched to 0% for both
the camera output and the
recording.
camera output and 0% for the
recording.
155