Error Codes - Panasonic AJ-HPX2000 Operating Instructions Manual

Error Codes

The following error codes are displayed in the display window if an error occurs in the camera:
Confirm the type of warning and refer to the details in the [Warning Description Tables] (page 145) for countermeasures.
Code No.
E-11 Video initialisation error
E-27 Recording control error
E-30 P2 card removal error
E-34 LCD microcontroller error
E-38 P2 streaming microcontroller error
E-39 Abnormal initialization of the AVC-Intra codec board (optional AJ-YBX200G) 1. System Errors
E-3F Microprocessor error in the camera control circuit.
E-40 Image sequence error (in case of 24P, 30P and 25P)
E-63 Something is wrong with the system control microprocessor.
E-6F Reference signal error.
00:00:00:11 Recording error on a P2 card
1394 Error Codes
Code No.
Signals being input to the DVCPRO/DV
connector are not 1 a speed transfer
1394 E-80
signals in DV format.
Signals being input to the DVCPRO/DV
connector are not 1 a speed transfer
1394 E-81
signals in DVCPRO (25 Mbps) format.
Signals being input to the DVCPRO/DV
connector are not 1 a speed transfer
1394 E-82
signals in DVCPRO50 (50 Mbps) format.
Incorrect signals are being input to the
1394 E-83
DVCPRO/DV connector.
Signals being input to the DVCPRO/DV
1394 E-84 connector are not in DVCPRO or DV
format.
Signals being input to the DVCPRO/DV
1394 E-85 connector are not 1x speed transfer signals
in DVCPRO HD format.
Incorrect audio signals are being input to
1394 E-87
the DVCPRO/DV connector.
No signal is supplied to the DVCPRO/DV
connector.
1394 E-90
With the menu option REC MODE set to
DV, copy guard information signals for
1394 E-91
recording prohibited data are being input to
the DVCPRO/DV connector.
The DVCPRO/DV connector is not properly
1394 E-92 connected. The viewfinder indicates the
message "1394 INITIAL ERROR."
148 Maintenance and Inspections : Warning System
Description
Description
1. System Errors
1. System Errors
2. Card removal error
1. System Errors
1. System Errors
1. System Errors
6. Image Sequence Error (24P, 30P, 25P)
1. System Errors
1. System Errors
7. Recording Error
Recording
Stops
Stops
Stops
Stops
Stops
Stops
Continues with no sound.
While the recording mode continues, no
data is recorded on cards unless the
abnormal condition is corrected. If an
error has occurred before recording, then,
recording does not start.
Stops
No recording in 1394 input mode can be
performed.
Type of warnings
Indication in display
window
The time code section of the
display window indicates the
appropriate error code that
blinks every two seconds.