Table of Contents
Advertisement
Press the THUMBNAIL button to display the thumbnail
screen on the LCD monitor. Pressing the THUMBNAIL
button again returns the display to the regular display.
When switching is done from the regular screen display to
the thumbnail screen display, all the clips will be displayed
on the thumbnail screen.
Pressing the MENU button allows you to navigate the
thumbnail menu.
Note
With the TCG switch positioned at [SET], when the time
code or user bits are set or when camera menus are being
manipulated, thumbnails cannot be manipulated.
1
4
5
Thumbnail screen
8
110
Manipulating Clips with Thumbnails : Thumbnail Screen
Thumbnail Screen
6
7
9 10
11
12 13 14 15
1.
Display Mode
The type of the thumbnail indicated on the display and
the types of the other information screens are
indicated.
ALL:
Display all clips.
SAME FORMAT:
The clips in the same format as the system
format are shown.
SELECT:The clips selected with the SET button are
shown.
MARKER: Display clips with shot marks.
TEXT MEMO:
Display clips with text memo data.
2
SLOT n: Display clips in the specified P2 card.
(n: 1 to 5, which indicates Slots 1-5.)
UPDATING..:
Indicated when the camera-recorder is
updating the screen or reading data. When
the screen is being updated, the rotating
icon
3
Please refer to [Switching the Thumbnail Display]
(page 113) for more information.
2.
Slot numbers and HDD status
This section indicates on which P2 card the pointed
clip is recorded. The number of the slot that contains
the appropriate P2 card is indicated in yellow. If the
clip is recorded on more than one P2 card, then the
numbers of all slots that contain the appropriate cards
are indicated. The numbers of the other slots are
shown in white if they contain P2 cards.
When the following P2 card is inserted, the slot num-
ber is displayed with a pink frame.
RUN DOWN CARD
(A P2 card on which the number of rewrites exceeds
the limit defined in the standards.)
DIR ENTRY NG CARD
(A P2 card on which the directory structure does not
comply with the standards.)
The USB HDD section is indicated as follows:
Other than the USB HOST mode: gray
Not connected in USB HOST mode: gray
HDD recognized and usable in USB HOST mode:
white
HDD recognized and thumbnails shown in USB
HOST mode: yellow
HDD recognized and data unable to be copied in
USB HOST: red
3.
Time Display
You can set this to display the time code at the start of
clip recording, the user bits at the start of clip
recording, the shooting time, the shooting date, the
shooting and date or USER CLIP NAME.
is indicated.
Hide quick links:
Advertisement
Table of Contents
