Externally Locking The Time Code - Panasonic AJ-HPX2000 Operating Instructions Manual

Memory card camera recorder
Hide thumbs Also See for AJ-HPX2000:
Table of Contents

Advertisement

Externally Locking the Time Code

The unit's internal time code generator can be locked to an
external generator. In addition, the external time code
generator can be locked to the unit's internal generator.
Example of connections for external locking
As the figure shows, connect both the reference video
signal and reference time code.
Example 1: When locking onto an external signal
Reference time
code
TC IN
GENLOCK IN
Reference video
signal
Note
In place of the HD Y reference signal, composite video
signals can be input as the reference video signal.
62
Adjustments and Settings for Recording : Setting Time Data
Example 2: When connecting a multiple number of units
and using one of them as the reference unit
TC OUT
MON OUT or
VIDEO OUT
(VBS)
TC IN
GENLOCK IN
TC OUT
MON OUT or
VIDEO OUT
(VBS)
TC IN
GENLOCK IN
MON OUT or
VIDEO OUT
TC OUT
(VBS)
To the next camera
Note
The system can be configured with multiple units by
opening the <GENLOCK> screen from the SYSTEM
SETTING page and setting the GL PHASE item to the
connector using menu operations.
The phase of the time code can correspond to either the
HDY output signals of the MON OUT connector or VBS
output signals of the VIDEO OUT and MON OUT
connector.
However, the same value should commonly be set to the
GL PHASE for all cameras. If different values coexist in the
system, the shooting timing may not correspond to each
other.
Reference video signal
MON OUT (VBS) or
VIDEO OUT (VBS)
Setting of GL PHASE
Variable
Item
range
GL PHASE
HD SDI
For selecting the output signals that
lock phases to the signals that are
COMPOSIT
input in the GENLOCK IN connector.
HD SDI:
COMPOSIT:
Reference unit
Setting of GL PHASE
COMPOSIT
Remarks
For locking the HD SDI signals to
the GENLOCK input.
For the down converter output
signals, the start position of the
video delays by about 90 lines.
For locking the down converter
output signals to the GENLOCK
input.
For the HD SDI output signals, the
start position of the video gains by
about 90 lines.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents