Switching The Thumbnail Display - Panasonic AJ-HPX2000 Operating Instructions Manual

Switching the Thumbnail Display

The display can be switched so that only those clips matching the specified conditions are displayed in the thumbnail
screen.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the THUMBNAIL MENU button. The thumbnail
menu appears.
THUMBNAIL
MENU button
3
Select THUMBNAIL from the thumbnail menu. Switch
the thumbnail display by selecting one of the following
items:
ALL CLIP:
Display all clips.
SAME FORMAT CLIPS:
Displays clips in the same format as the system
format. System format means the image system set in
SYSTEM MODE and REC MODE. Press the MODE
CHECK button to display the viewfinder. Refer to
[1.System mode] (71 page) and [3.REC mode] (71
page) of [Viewfinder Status Indication Layout].
SELECTED CLIPS:
Display randomly selected clips.
MARKED CLIPS:
Display clips with shot marks attached.
TEXT MEMO CLIPS:
Display clips with text memo data attached.
SLOT CLIPS:
Display clips recorded in the P2 card inserted in the
specified slot.
When this item is selected, SLOT1 to SLOT5 are
displayed as a sub-menu. Select the desired slot to
display the clips.
SETUP:
Please refer to [Setting the Thumbnail Display Mode]
(page 124) for information about this item.
EXIT:
Close the sub-menu.
Manipulating Clips with Thumbnails : Switching the Thumbnail Display
113