Shot Mark Function; Recording Setting And Operation Mode - Panasonic AJ-HPX2000 Operating Instructions Manual

A shot mark is added to the thumbnail of a clip to
distinguish that clip from others. With the LCD monitor,
only clips that have shot marks can be viewed and/or
played back.
Adding Shot Marks
To add a shot mark during recording, press the SHOT
MARK button. The viewfinder displays "MARK ON" and
adds a shot mark to the thumbnail of the appropriate clip.
Another press of the button erases the shot mark.

Recording Setting and Operation Mode

AJ-HPX2000 recording mode works according to the priorities outlined in the following table, relative to the setting of the
menus and switches.
Functional
operation mode
PC MODE
USB
USB device
DEVICE
USB host USB HOST
1394 Input record
INTERVAL REC
OFF
LOOP REC
Normal Recording
* Disabled for color bars

Shot Mark Function

SHOT MARK
button
Menu switches related to system/recording
REC INTERVAL
SIGNAL REC MODE
Disabled Disabled
Disabled Disabled
1394 Disabled
ON or
ONE SHOT
CAMERA
VIDEO
SDI (optional)
OFF
Shot marks may also be added or erased using clip
thumbnails. For more information, see [Shot Mark] (page
115).
Notes
When the color bar is output or the unit is in LOOP REC
mode and INTERVAL REC mode, it is impossible to add/
delete shot marks.
It is impossible to add shot marks to incomplete clips
(refer page 111).
For clips recorded on plural P2 cards or clips split on a
P2 card (refer to Notes on page 10), a shot mark is added
to the top clip only.
LOOP REC PRE REC Recording a
MODE MODE Text Memo
Disabled Disabled Disabled
Disabled Disabled Enabled
Disabled Disabled Enabled
Disabled Disabled Disabled
Enabled
ON Disabled
1s - 8s/15s
Enabled
OFF Enabled*
1s - 8s/15s
Recording and Playback ：Shot Mark Function
Buttons
Proxy
recording
Shot Mark
(optional)
Disabled Disabled
Enabled Disabled
Enabled Disabled
Disabled Disabled
Disabled Disabled
Enabled* Enabled
41